Find the answers to how to restart your set-top box, Watch TV Everywhere, and more.
Frequently Asked Questions
Kaon Voice Classic Remote
Infrared (IR) Mode
Once batteries are installed in the remote, no additional pairing is needed. The remote works immediately in IR mode.
- Just point it at your Valley Fiber set-top box and press any button.
- At the top of the remote, you’ll see the LED flash when a button is pressed.
Bluetooth Mode
Pairing via Bluetooth enables voice search and removes the need for line of sight to the Set Top Box.
Steps:
1. On your remote, press the Home button to open the Android TV home screen.

2. Press the Google Assistant button located in the middle of the remote. This will launch the pairing screen.

3. Follow the on-screen instructions:
- Hold the REC/SET button for 3 seconds
- Then press the Home button
If the middle LED flashes when pressing buttons, the remote is now paired via Bluetooth.
If the bottom LED flashes, the remote is still in IR mode (Bluetooth pairing failed).
Pairing the Remote to Your TV
This allows the remote to control your TV’s power, volume, and other functions (exact functions depend on your TV model).
Method 1 – Manual Code Entry
- Find your 5-digit TV code (see list below – all codes start with “1”)
- Hold the REC/SET button for 3 seconds
- The middle LED will stay on
- Enter the 5-digit TV code (see Common TV Codes below)
- The middle LED will blink to confirm the code
Common TV Codes
| TV Brand | Code(s) |
| LG | 10011 |
| Samsung | 10305 |
| Sony | 10067 |
| Panasonic | 10076 |
| RCA | 10267, 10268 |
Other brands (e.g. Westinghouse, Element) often work with 10011.
Method 2 – Universal Code Search
- Hold REC/SET until the middle LED stays solid
- Enter 9-9-1
- Press Channel Up repeatedly (not the arrow pad) until your TV turns off
- Press OK to lock in the pairing
Alva M4 Kaon Remote
A – Pairing the Remote to Your Set Top Box
Bluetooth Mode
The Alva M4 remote connects to your Valley Fiber set-top box via Bluetooth, which enables voice search. The remote is paired during initial setup, and your set-top box will automatically try to reconnect if the connection is lost. If the remote does not reconnect, follow the steps below.
Steps:
- Hold the Back and Home buttons together for 3 seconds.

- When the orange LED turns on, release both buttons.
- The orange LED will blink while the remote pairs with your set-top box (up to 2 minutes). The remote may appear as “Alva M4” during pairing.
- If the blinking stops and the remote controls your set-top box, the remote is now paired via Bluetooth.
- If the blinking stops after 2 minutes and the remote does not respond, pairing failed. Repeat the steps.
B – Pairing the Remote to Your TV
This allows the remote to control your TV’s power, input, volume, and mute functions (exact functions depend on your TV model).
Method 1 – Quick Search by Brand
- Hold the TV Input button and your TV brand’s number button for 3 seconds (see table below).
- The orange LED will turn on. Release both buttons.
- Press the Right Arrow repeatedly until your TV mutes.
- Press OK to save the code. The red LED will blink twice to confirm.
Brand Number Buttons
| TV Brand | Number Button |
| Samsung | 1 |
| LG | 2 |
| Vizio | 3 |
| TCL | 4 |
| Sony | 5 |
| Hisense | 6 | Insignia | 7 | Sceptre | 8 | Toshiba | 9 | Philips | 0 |
Method 2 – Auto-Search (All Brands)
- Hold the TV Input and OK buttons for 3 seconds.
- The orange LED will turn on. Release both buttons.
- Press the Right Arrow repeatedly until your TV mutes.
- Press OK to save the code. The red LED will blink twice to confirm.
Tip: Press the Left Arrow to go back to the previous code.
Setup closes automatically after 60 seconds without a button press.
Restart or power cycle the STB by unplugging the power for 30 seconds and plugging it back in.
1. Download the Valley Fiber TV app. The app is supported on Apple devices (iOS, iPadOS) and most Android devices (AndroidTV, Google TV, and Android)
Keep in mind the app is only available while connected to a Valley Fiber network, not cellular data.
2. Connect to the Valley Fiber TV App via Wi-Fi or hardwire (using an Ethernet cable to connect a device to a router or access point). We recommend hardwiring if possible.
3. Once the App is installed, log in to your Valley Fiber account using the Customer ID and password the Valley Fiber technician provided at the time of installation.
1. If the batteries are low, slide down the back part of the remote and then open it to reveal the batteries
The first time you open a brand-new remote, the back panel can be a bit difficult to slide open. If that happens, place the remote between your hands and slide your hands in opposite directions to open it.
Kaon Voice Classic Remote
Alva M4 Kaon Remote
- Put in 2 new AAA batteries
- Ensure batteries are inserted the correct way
- Slide up the battery shield to the original position
Kaon Voice Classic Remote
1. Press and hold the Record button on the remote until the LED on the remote is solid
2. Enter the code 9-9-9
3. The blinking LED tells you how much charge the batteries have:
4 flashes = full
3 flashes = 75%
2 flashes = 50%
1 flash = 25%
You may also notice the LED light flashes 2 or 3 times with every button press during regular use. This means the batteries are low and ready for a change.
If the two LED lights on your remote stay on continuously, the batteries may be low, or a button may be held down or stuck.
Alva M4 Kaon Remote
Below 30% battery level, the backlight for the keys stops working.
1. Press Home.
2. Select the gear/settings icon at the top right of the home screen.
3. Scroll down to “Remotes & accessories”.
4. Click on Alva M4.
5. The battery level will be shown as a % out of 100.
To log in to your Valley Fiber TV account use the TV app Customer ID and password the Valley Fiber technician provided at the time of installation.
If you don’t have access to this information, please contact technical support 1-800-958-5698.
To enable closed captioning watch the video tutorial or follow these steps:
- While watching any channel, press the OK button on the remote control
- Navigate right to select the Audio & Subtitles icon (at the bottom right-hand side of the screen)
- Press the OK button on the remote to select “Subtitles” and then press down on the remote to select “captions (cc1)”
- Press the OK button on the remote to select “captions (cc1)”
- Press the Back button on the remote
- Captions should now appear on the program you are watching
Is your guide stuck in the left corner of your screen when either watching programming or scrolling through your TV guide?
Example:

The best way to fix this issue is with a simple power cycle of your set top box.
To power cycle your set top box, unplug the power for a minimum of 30 seconds.
After 30 seconds plug the set top box back in, and test your guide.
This power cycle fixes the issue in most cases, if the issue proceeds please contact our tech support department at:
1-800-958-5698
Stream some of your favourite TV channels and programming on your tablet, smartphone, laptop, and other devices through Watch TV Everywhere.
Registering for WTVE
To register for Watch TV Everywhere, watch the video tutorial or follow these steps:
1. Visit www.wtve.ca to access the registration page.
2. Pick Valley Fiber in the Select Your TV Provider drop-down menu.

If you see the Valley Fiber TV logo at the top right of the screen, you have selected the correct provider.
If you see a different provider at the top right corner of the screen, you can go back to make the fix. Choose the “Click here” option. It appears next to “Valley Fiber not your TV provider?” at the bottom of the screen.

3. After selecting Valley Fiber as the TV provider, click on “Register” and fill in all fields for the registration process.
When asked for a verification code, use the numbers that appear beside “Enter” on the website (see image below).

4. Once the registration form is complete, a verification email will be sent to the email address used to create the WTVE account. Verify your email address by following the steps described in the email.
Log in to WTV
1. After the registration process is complete click on “Login”. This will bring up the screen seen below.

2. Enter the email and password you used to create your WTVE account.
3. After logging in, the logos of the TV networks available to you will appear on your screen.
4. Click on the logo of the TV network you wish to watch. This will redirect you to the selected network’s website or app.
5. Once in the app or on the website of the network you selected, click on Sign In or Login.
6. Search or scroll to find and select Valley Fiber as your TV provider.
7. Enter the same email and password you used to create your WTVE account to sign in/log in.
Follow the troubleshooting steps applicable to the type of TV STB you have – Arris or Kaon.
ARRIS

Reset via STB
1. Flip over the STB to view the bottom
2. Press and hold the small, circular brown button
3. Your TV screen will then ask you to hold the button for 10 seconds to factory reset, or release to cancel. Hold the button until the STB starts resetting itself.
4. The STB will go through a factory reset process until you are eventually presented with a Pair Your Remote screen.
Reset via settings
1. Press the home button on the Arris remote
2. Open Settings
3. Open Device Preferences
4. Select About and then Reset
5. Press Reset again to confirm
6. Press Delete everything
7. The STB will go through a factory reset process until you are eventually presented with a Pair Your Remote screen.
Pair Remote
1. Press and hold the Play/Pause and Back buttons until the LED on the remote blinks red.
2. Press any button immediately after to finish pairing.
3. If it doesn’t work the first time, repeat steps 1 and 2 until your remote starts working.
STB Setup
After the remote is paired, the STB will now go through a quick setup process and ask you the following questions:
- Select a language, select English.
- When asked if you want to set up your TV with your Android phone, choose Skip.
- If you are connected through a Wi-Fi connection, select your Wi-Fi network by clicking on the preferred network and entering your Wi-Fi password with the on-screen keyboard.
If you are connected using an Ethernet cable, select Ethernet
- Click Skip when prompted to Make the most of your TV.
- Accept the Terms of Service.
- Select Yes for Location.
- Select either yes or no for “Help Improve Android” based on your personal preferences (this won’t affect the STB setup in any way).
- Click the OK button until you reach the end of the slideshow.
- You will now be back on the STB home screen.
KAON
KSTB2500


Reset via settings
1. Press the Home button on the remote
2. Open Settings
3. Open Device Preferences
4. Select About and then Factory Reset
5. Select Factory Reset again to confirm
6. Press Erase everything
7. The STB will go through a factory reset process until you are eventually presented with a Pair Your Remote screen.
Pair Remote
1. Press and hold the Record/Set button at the bottom right of the remote until the bottom LED near the top of the remote turns off and the middle one turns on.
2. When the middle LED turns on, release the Record/Set button and press the home button immediately. This should make the middle LED begin to blink, indicating it is pairing.
3. To finish pairing, press any button immediately after the middle LED blinks.
4. If it doesn’t work the first time, repeat steps 1 through 3 until your remote starts working.
STB Setup
After the remote is paired the STB will now go through a quick set-up process and ask you the following questions:
- If you are connected through a Wi-Fi connection, select your Wi-Fi network by clicking on the preferred network and entering your Wi-Fi password with the on-screen keyboard.
If you are connected using an Ethernet cable, select Ethernet
- Select a language, select “English”
- Click skip when prompted to Make the most of your TV
- Accept the Google Services
- Click skip for the Google Assistant
- Click continue on Setup Assistant Later
- Click continue on Install Additional Apps
- Select yes for Location
- Click the OK button until you reach the end of the slideshow
- You will now be back on the STB home screen
No. Although the channels broadcast in 4K, the availability of 4K content depends on what the network decides to offer.
Check the network’s website for a content schedule or look for a 4K logo on the broadcast to confirm.
Below are a few reasons your 4K channels may be playing in HD:
- 4K resolution features over 8 million pixels. You can only experience this with a 4K TV.
- Check listings online for when the TV station plans to broadcast 4K programming. Broadcasters may choose to play HD content even on their 4K channels.
- Keep the box close to your router for the best signal reception.
4K TV, also known as Ultra-HD, offers four times the number of pixels as HDTV. This means a clearer, sharper image with deeper, bolder colors. However, to display content in 4K, the programming must be captured and transmitted in 4K resolution, and not all providers currently offer 4K content.
1. Restart or power cycle the STB by unplugging the power for 30 seconds and plugging it back in
2. Select the Valley Fiber TV App on your TV
3. Press the Menu button on the remote control and then navigate to Settings on the Features menu. For extra help on how to navigate to the Features menu, watch the tutorial video.
4. Select “Network Settings” to view the list of available networks under Network & Internet
5. Find your Wi-Fi network on the list and enter your password to connect to it
If the network is visible under the available networks list but not connecting, verify that the Wi-Fi password is correct.
If the Wi-Fi connection issues continue after using the correct network and password, try hardwiring the STB.
- Connect the STB to the router using an ethernet cable (if you have one).
- Ensure the cable is securely plugged into the appropriate ports.
- Once hardwired, the STB should automatically connect to the internet.



